-
This ultra high intensity line light series is built to handle the most extreme line scan lighting requirements.
-
Provides an intensity level of 2,100 klx (working distance of 75 mm).
-
Pre-engineered for expandability in 150 mm (6”) increments up to 2400 mm (94.5”).
-
Available in multiple wavelengths.
-
In the event of abnormally high ambient temperatures, the device automatically shuts down when the housing reaches 60°C and resumes operation at 56°C.
-
Note: Requires third party power supplies – refer to spec sheet.
Advanced Illumination - DCS-MP Manual Dimming Accessory
-
Detented, 30 position potentiometer for repeatable dimming
-
Built in DIN-rail or panel mounting feature
-
Flip up cover for potentiometer to prevent accidental adjustments
-
Spring clamp wiring terminal for vibration proof installation
General Specs
Mechanical Specs
Electrical Specs
Part No Key
CAD Files
More Product Information
Advanced Illumination’s AD-I3-CGX2 adaptor cable is for connecting I3/I3S configured lights with Cognex Gen2 Cameras. By default, an I3/I3S controller can connect directly to a Cognex Gen1 Camera but needs this adaptor to connect to a Cognex Gen2 Camera.
Our “A” and “W” Series amplifiers have the power to deliver all the field strength you need. With unsurpassed mismatch capabilities and excellent flatness, they provide all the power promised over the entire operating band.
We subject our amplifiers to the harshest conditions just to make sure they give you reliable service and performance over the long haul. We test them under various output VSWR loads to stress them to the limit. The only problem we ran into was that there were no available loads to handle the enormous power up to 80,000 W that our amplifiers deliver. Whereas this would stop most manufacturers, it presented another challenge to our talented designers, and we designed our own. All our RF solid-state amplifiers have modulation capability that will faithfully reproduce AM, FM or Pulse Modulation appearing on the input signal for use in the most demanding EMC applications.
These technologically advanced amplifiers perform beyond the norm, beyond expectations, and way beyond the abilities of other test amplifiers.
These self-contained, broadband, completely solid-state amplifiers are designed for applications requiring the ultimate in output power over a wide instantaneous bandwidth with high gain. Extensive control and status reporting capabilities are available both locally and remotely. Most models feature air-cooled designs while some higher power units feature liquid cooled designs. The touch-screen panels are intuitive, convenient, and easy to use.
-
High dispersion for reflective surfaces and shorter working distances.
-
Provides a wider and more intense illumination area than the AL126.
-
IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
-
Available with polarization and diffusion light conditioning.
-
This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 20″
-
The RL113 High Intensity Bright Field ring light offers a very wide array of wavelengths from UV to IR.
-
With intensities of up to 45.5kLux at 12” (300mm), the RL113 is particularly well suited to longer working distances.
-
A rugged, heavy enclosure, compliant with IP67 requirements, is well suited to demanding environments.
-
4 Independent Channels, 1 Output Connector
-
Includes built-in pre-programmed sequencing.
-
Provides control for computational imaging, including photometric stereo, extended depth of field, combined bright field + dark field, high dynamic range, and high resolution color.
-
Ideal for multi-channel lights and multi-light stations. Due to power output constraints, some configurable light lengths may be limited.
-
Housed within a compact enclosure with DIN rail mounting.
-
Driven with SignaTech™ for improved safety and easy operation.
-
NOTE: NOT COMPATIBLE WITH C1 CONNECTORS
-
Edge-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Custom aperture diameters are available from ¼” to 3” (6.4 to 76mm) in ¼” increments.
-
Contained within a thinner housing than our Back-lit Flat Diffuse Lights (FD Series)
-
Available in visible and infrared wavelengths.
-
Provides light intensities of up to 9.2kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 24”x 24” (610mm) in 1” (25mm) increments.
-
This series comes with LB111 Mounting Brackets.
-
Easy to Use
-
No need to break the circuit or insert a shunt
-
Small form factors for use on crowded boards
-
-
Variety of Applications
-
Bandwidths up to 100 MHz
-
Peak currents up to 700 A
-
Sensitivities down to 1mA/div
-
-
High Precision Measurements
-
Low frequency accuracy of 1%
-
Integrated autozero capability
-
-
Fully Integrated with Teledyne LeCroy Oscilloscope
-
No additonal hardware is required
-
Power is supplied from oscilloscope ProBus connection
-
Automatic display of waveforms in Amps and calculated power traces scaled correctly in Watts
-
Degauss and Autozero directly from oscilloscope user interface
-
-
DCS025 Deskew Calibration Source
-
Provides ability to precisely deskew most voltage probes along with 30, 150 and 500A current probes
-
-
High dispersion for reflective surfaces and shorter working distances.
-
Provides a narrower and less intense illumination area than the AL116.
-
IP65 compliant washdown option is available, as are a wide spectrum of wavelengths.
-
Available with polarization and diffusion light conditioning.
-
This expandable compact bar light is pre-engineered for custom lengths in 2″ increments up to 40″.
Advanced Illumination
Advanced Illumination® (Ai) is a leading developer and manufacturer of LED lighting and control technology for machine vision illumination. Founded in 1993, Advanced Illumination was the first company to bring LED lighting to market and has since become one of the most trusted names in the machine vision industry. Ai offers a number of highly customizable backlights, bar lights, coaxial lights, diffuse lights, line lights, bright field ring lights, dark field ring lights and spot lights. Whether you’re an OEM or an end user, Advanced Illumination has a knowledgeable team of engineers and manufacturing professionals ready to provide you with a solution tailored to your lighting needs.
Contact Details
Advanced Illumination, Inc.
440 State Garage Road, Rochester, VT 05767, USA
Phone: 802-767-3830
Fax: 802-767-2636