FormFactor - Cascade QuadCard™ - Cost-effective, versatile probe card solution
- Accommodates a combination of up to four Cascade Microtech probes
- Configurable for mixed-signal RF/mmW testing
- Quick and easy repairs to be performed in the field, by simply replacing individual probes
- Adaptable to new device layouts by exchanging individual probes
The QuadCard probe card is the industry’s first configurable, multi-quadrant probe adapter that employs innovative fine probe aligners to mount up to four FormFactor probes on a single probe card. It is designed to accommodate a combination of our probes such as Infinity Probes®, ACP probes, |Z| Probes® and Multi-|Z| Probes, which are aligned individually by the fine probe aligners.
More Product Information
Comprehensive, Turn-key Integrated Measurement System (IMS) with Keysight Photonics Application
-
High power – 66 W at 2.4 GHz and 43 W at 5 GHz
-
Extremely low insertion loss of ≤ 0.4 dB (typical) up to 40 GHz
-
Excellent contact control and low contact resistance
-
High performance on any pad material (Al or Au)
-
Longest lifetime – typically one million (1,000,000) touchdowns
- Up to 12 contacts; any contact can be DC, Power, Logic to 500 MHz,or RF to 20 GHz
- Online design configuration tool helps you to specify your probe in minutes
- All designs are fully quadrant compatible
- Full solution includes probes, calibration substrates, stations, accessories and software
- Scalable architecture for future needs
The CSR family of calibration substrates delivers the highest accuracy available due to the high quality of each substrate. The calibration standards are manufactured using rugged, hard gold, which ensures a long lifetime.
-
Ease of use – Less experienced operators can perform an RF calibration up to 500 GHz by simply pushing a button. This reduces the need of experienced users full time on each system.
-
Reduced Soak Time – The system will automatically re-align the probes to the pads if they drift from alignment. This reduces test time and increases throughput.
-
Unattended Use – Measurements can be left running over night or the weekend, testing all devices on the wafer, and at different temperatures without the need of an operator.
-
Calibration Monitor and Re-calibration – System will continuously monitor calibration drift, and automatically re-calibrate the system should the drift exceed a predefined limit.
Optimized Measurement Setup
- Multi-purpose SIGMA instrument integration kit
- Shorter cabling and universal chuck connection
- Triax probe with protected guard
- Optimized signal path
- Safe probe tip exchange
- Seamless integration of various analyzers
High Power Chuck
- Triax design for low-leakage measurements up to 3 kV
- Special chuck surface coating
- High-isolation ready
- High-current measurement up to 100 A with lowest contact resistance
- Optional upgrade for 10 kV (coax) operating voltage
- Thin wafer handling capability
Safe Operation
- Arcing protection
- Shield Enclosure with interlock
- Advanced grounding concept
- Maximum protection from high-voltage shock for users and devices
- Common ground protection for all instruments
- EMI/light-tight shielded environment
- Choice of Series resistance or Termination (signal line to ground)
- Use of High Performance RF Resistors
- Choice of Resistor values available
- Choice of body styles, Infinity, ACP or FPC
- Can help to stabilize oscillations in high-gain devices
- Impedance match to low dynamic resistance laser diodes
- Custom configured for your application
- DC-40 GHz bandwidth
- 10 ps rise time
- Low insertion and return loss
- 2 mils of tip-to-tip compliance
- High probing angle and clearance
- Maximized Field-of-View with Ultra-Sharp Image Quality
- Slim Design
- Patent-Pending Crash Protection
- Intelligent Lens Mount
- Application Flexibility
- Seamless Integration with Velox Probe Station Control Software
- Autonomous Measurement Assistants
- Remote Operation
See "Specifications & Details" tab for more information
FormFactor, Inc.
FormFactor, Inc. (NASDAQ:FORM) is a leading provider of essential test and measurement technologies along the full IC life cycle – from characterization, modeling, reliability, and design de-bug, to qualification and production test.
We constantly strive to help our customers solve the advanced test and measurement challenges of the broader semiconductor industry. Our focus on customer partnership, innovation, agility and operational excellence allows us to earn sustainable business every day.
Contact Details
FormFactor, Inc. Corporate Headquarters
7005 Southfront Road, Livermore, CA 94551, USA
Phone: 925-290-4000
Test & Measurement
Download Line Card
