MVG - EMC Test Chambers - MIL-STD Chamber 80 MHz - 40000 MHz
A high performance RF-shielded EMC chamber specifically designed for emc measurements in accordance with MIL-STD-461E/F and RTCA DO160 requirements.
|
Key Features |
|---|
|
EMC Chamber Dimensions (Internal shield) 5.5 m x 5.5 m x 3.5 m - Typical 2.5m wide test bench - Note Dimensions may vary, dependent on the dimensions of the equipment under test for e.g. a test bench or aircraft |
|
EMC Compliance for Emission/Immunity performance |
|
Absorbers compliant with MIL STD requirement -6dB 80-250MHz and -10dB > 250MHz |
|
Performance range 80 MHz - 40000 MHz |
|
Independently certified 100 dB @ 18 GHz shielding performance (EN50147-1) |
|
EMC absorbers ULTRA UHC series polypropylene based Broadband electromagnetic |
|
Optional Commercial testing with HyPyr-Loss™ Ferrite and Hybrid Lining available |
|
Optional High power absorbers available for radar and other applications |
|
Optimized computer modeling to enable cost effective EMC absorbers layouts |
|
This EMC Chamber is a Bespoke and modular design enabling unlimited performance options and facilitating upgrades or relocations |
|
This EMC Chamber is available as part of a complete turnkey package for EMC measurements |
|
Applications |
|---|
|
EMC Compliance testing Conducted emissions |
|
EMC Compliance testing Conducted immunity |
|
EMC Compliance testing Radiated emissions |
|
EMC Compliance testing Radiated immunity testing |
Document
More Product Information
Power Subsystem for Transportable Military test stand
- Provides eight channels of programmable DC power with output isolation function
- Output disconnect function
- Total control via Ethernet within power supply
- Mounted in custom in transportable shock-mount case
Our reverberation chamber is particularly suited for immunity testing for EMC measurement and special applications for very high-field strength applications (200V/m - 7000V/m). The paddle system ensures that the widest range of frequencies and particularly low frequency performance is maximized. This system meets testing requirements of the IEC61000-4-21 EMC testing specification.
- High power density in 4U/14U chassis up to 36 kVA.
- Intuitive touch panel control.
- iX2™ current doubling technology.
- Multi-language user interface for global operation.
- Auto paralleling for higher power.
- Combine units for multi-phase configurations
- Complete optional avionic test suites.
- ATE version available
- 1-slot 1U allows high-port density in a robust form factor
- Price/performance
- Ease of use
- Advanced architecture
- User-friendly software (XenaManager, Xena OpenAutomation)
- Test automation with XOA
- Three years’ software updates
- Three years’ hardware warranty
- Free tech support & training for the product lifetime
- Combine up to 6 SPDT and 6 multiport high-performance building blocks in a 2U footprint
- Extended life and self-terminating options provide maximum design flexibility
- Embedded web interface provides interactive utility to monitor and control relays from anywhere in the world
- Flexible API supports IVI and Linux development environments minimizing software investment
- LXI Trigger Event implementation provides seamless test synchronization with external devices
35 ppm AC/DC multifunction calibrator for multimeters, power meters and generally all kinds of electric meters. Implementing modular design, 9010 can be further customized to calibrate oscilloscopes, insulation testers, sources and transducers.
- 35 ppm accuracy
- 400 MHz scope option
- Power quality functions, voltage from current
The VS1510 is a video & data recorder/server packaged in a rugged compact chassis (4.92” x 5.75” x 7.28 ” / 9.9 lb), for recording on a Removable Memory Module (RMM).
Recorded data can be replayed in a standard PC/Windows® environment, using specific or COTS mission debrief solutions for post mission analysis.
In addition, typically for ISR applications, data can be replayed while recording on board. The ENERTEC™ mission data processing and distribution units offer cost-effective and dependable solutions for collecting, processing, storing, utilizing, and sharing field and mission data.
These units are designed for both manned and unmanned ground, air, and sea vehicles. They undergo rigorous validation and formal qualification testing, conforming to established standards such as DO-160 and MIL-STD-810.
-
Combination of DC and RF in a single probe module: One dual probe or a maximum of three RF; a maximum of 9 DC standard (other quantities upon request).
-
Utilizes ACP tip design, GSG, GS or SG
-
RF tips available from DC to 110 GHz
-
Choice of BeCu or tungsten tips
-
DC power needles come standard with 100 pF microwave capacitor
-
Power bypass inductance: 8 nH
-
Maximum DC voltage: 50 V without power bypassing (25 V with standard power bypassing, and component dependent with custom power bypassing)
-
Ideal for probing the entire circuit for functional test
-
Dual ACP configuration supports differential signaling applications
-
DC probes can provide power or slow logic to circuit under test
- Energy absorber with a rating of 400VDC at ±150A
- Provides up to 400V at 150A for 60kW of output power
- Energy Absorber Load chassis creates a total resistance of approximately 1.5 Ohms at 30kW continuous and 60kW peak
Microwave Vision Group (MVG)
The Microwave Vision Group offers cutting-edge technologies for the visualization of electromagnetic waves. With advanced test solutions for antenna characterization, radar signature evaluation and electromagnetic measurements, we support company R&D teams in their drive to innovate and boost product development.
With highly skilled teams across the world and over 450 dedicated employees, we proudly serve the telecommunications, aerospace & defence, automotive, academic and research communities.
Contact Details
Microwave Vision Group
450 Franklin Gateway, Suite 100, Marietta, GA 30067, USA
Phone: 678-797-9172
Test & Measurement
Download Line Card
