Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
Enables wafer probing up to 100 A pulsed and 10A DC
-
Innovative multi-fingertip design provides even distribution of current
-
Supports up to 500 V
-
Replaceable Tungsten probe tips
-
Temperature range of -60°C to 300°C
-
Minimal contact resistance at the pad-tip junction to reduce heating during measurements, with fewer probe marks
-
Prevents against thermal runaway
-
Measure devices on wafer at higher currents than ever before
-
Small scrub minimizes damage to aluminum pad
-
Small footprint – tip fits on a 1 mm pad
-
Available in 250 MHz and 350 MHz models.
-
2, 4 and 8 channel modes.
-
16-bit vertical resolution.
-
Max Sampling rate of 1.2 GS/s.
-
Max sinewave frequency of 250 MHz and 350 MHz respectively.
The CSR family of calibration substrates delivers the highest accuracy available due to the high quality of each substrate. The calibration standards are manufactured using rugged, hard gold, which ensures a long lifetime.
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Independently cooled cold shield
-
Probe positioners placed inside vacuum chamber
-
Intuitive, manual drives
-
Front loading capability through load door
-
Independent control of linear chuck stage and positioners
-
Contact/separation stroke for chuck
-
High power – 66 W at 2.4 GHz and 43 W at 5 GHz
-
Extremely low insertion loss of ≤ 0.4 dB (typical) up to 40 GHz
-
Excellent contact control and low contact resistance
-
High performance on any pad material (Al or Au)
-
Longest lifetime – typically one million (1,000,000) touchdowns
-
Highest resolution – 12 bits all the time
-
More channels, flexibility – 8 analog and 16 digital channels
-
Longest Memory – 5 Gpt records with simple navigation – no compromise
-
View 16 channels on one display with OscilloSYNC™
-
Powerful, deep toolbox enables and simplifies complex analysis
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Provides an effectively noise free environment around the device under test (DUT)
-
World’s first probe station with integrated TestCell Power Management (a TestCell is a connected set of equipment, including test software, instruments, probe station, thermal system, and related measurement accessories such as cables and on-wafer probes)
-
Up to 4x faster flicker noise thermal testing on 30 μm pads
-
Provides dark and dry environment for measuring light sensitive transistors, and devices at negative temperatures (<= -60°C) with frost free operation
-
Provides fully managed and filtered AC power to the entire system – prober and instruments
-
Filters harmful noise generated by external thermal control systems
-
Reduced “antenna effect” injection of unwanted RF noise into the measurement path
-
Provide up to 100dB attenuation (50Hz to 80Mhz) with 100mA max DC current handling
-
Ultra-low, fA-level current and fF-level capacitance measurements from -65 °C to + 300 °C
-
Enables full access to the chuck and the auxiliary sites
-
Intuitive, and precise movement of chuck in X, Y, and Z-direction
-
User-centered design minimizes training costs and enhances efficiency
-
Test automation out-of-cassette for higher test cell efficiency for over-night/over-weekend operation
-
Best solution for high accuracy IV/CV, low-noise and 1/f measurements with PureLine, AutoGuard and next generation MicroChamber technologies
-
Enables up to 5x faster time to accurate data
-
Advanced 4-axis semi-automatic stage for accurate positioning and repeatable probe-to-pad contact
-
RF/microwave device characterization, 1/f, WLR, FA and design debug
-
Wide range of extremly performant, reliable thermal chuck systems from ATT
-
Easy on-screen navigation, wafer mapping, and operation of accessories and thermal systems with Velox
-
User-centered design minimizes training costs and enhances efficiency
-
Different substrate carriers for wafers up to 200 mm or single dies
-
Probe cards and/or up to eight positioners
-
Ice- and condensation-free probing down to 77 K (liquid nitrogen) or below 20 K (liquid helium)
-
Probe positioners placed inside vacuum chamber
-
Joystick controller
-
Manual probe positioners with rotary feed-throughs
-
User-centered design minimizes training costs and enhances efficiency
-
Comprehensive alignment functions – from simple wafer alignment and mapping to automated alignment and test of multiple singulated chips, like IR – Focal Plane Arrays
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)