Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
-
Re-configurable and upgradable as requirements grow
-
Minimizes setup times with no loss in performance or accuracy
-
Seamless integration of various measurement instruments
-
Solid station frame
-
Built-in vibration-isolation solution for superior vibration attenuation
-
Rigid microscope bridge
-
Compact and rigid mechanical design
-
Highly accurate measurement results
-
Incorporates best-known methods
-
Ergonomic and straightforward design for comfortable and easy operation
-
Low-profile design
-
Simple microscope operation
-
Quick and ergonomic change of DUT through pull-out stage
-
Minimize training efforts
-
Fast time to data
-
Convenient operation
-
16GTps, PCIe 4.0 data rate operation. Fully compatible with lower PCIe data rates of 2.5, 5.0 and 8.0GTps
-
Link widths up to 4-lanes
-
32GB memory (16GB Up Stream and 16GB Down Stream)
-
Memory segmentation for capture of multiple traces
-
Host-Client connection for remote debugging using Ethernet or local debugging using USB
-
SMB capture and trigger for NVMe Management Interface (NVMe-MI) observability
-
Decodes all PCIe and NVMe traffic at all layers of the stack including the TLP, DLLP, and PHY layer blocks
-
Trigger and Search events include training sequences, ordered sets, queue pairs, PRPs, Scatter/Gather Lists (SGL), SMB, etc.
-
Full support of LTSSM for PCI Express
-
Multicolored LEDs on the front panel specify link speed, lane width and performance
-
Field replaceable modular fan and power supply assemblies
-
Works with Interposers for CEM slots, Flying-Lead probes, U.2 (SFF-8639), M.2, SFF-8674, OCulink, EDSFF and others
-
Supported by Xgig tool suite including Trace Control, Expert and Serialytics
Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The ZD accessories are engineered to provide the best signal fidelity without ringing or distortions commonly introduced with tip accessories.
-
Vector Network Analyzer Frequency Range from 10 MHz up to 3.2 GHz
-
Spectrum Analyzer Frequency Range from 9 kHz up to 3.2 GHz
-
-156 dBm/Hz Displayed Average Noise Level (Typ.)
-
-98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.)
-
Total Amplitude Accuracy < 1.2 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
All-Digital IF Technology
-
Standard Preamplifier
-
Distance to fault capability using VNA time domain analysis
-
Up to 1.5 GHz Tracking Generator Kit
-
Built-in Advanced Measurement capability (CHP, ACPR, OBW, CNR, TOI, etc)
-
EMI Pre-compliance Test Kit (Opt.)
-
10.1 lnch WVGA (1024 x 600) Display
-
Accommodates a combination of up to four Cascade Microtech probes
-
Configurable for mixed-signal RF/mmW testing
-
Quick and easy repairs to be performed in the field, by simply replacing individual probes
-
Adaptable to new device layouts by exchanging individual probes
-
Operates up to and including 16GTps, PCIe 4.0 data rates
-
One Pod supports link widths of up to 4-lanes. Multiple pods can expand link widths up to 16-lanes.
-
Downward compatible with PCIe 1.0 to 3.0 data rates of 2.5, 5.0 and 8.0GTps
-
Eight differential probe cables support simultaneous upstream and downstream capture
-
Supplied with two high-quality SFF-8674 equivalent custom cables for Analyzer attachment
-
Data path uses high-sensitivity amplifiers to ensure good signal capture with little or no tuning
-
Supports Analyzer side-band signal triggering and capture
-
Interposer power is independent of host system.
-
Power supply, 120/220 input, 12V/3A output
-
LEDs provide quick indication of power and status
-
Size: 170 x 107 x 34 mm (6.7 x 4.2 x 1.3 in)
-
Works together with multiple VIAVI Xgig PCIe Analyzer chassis types
-
Provides consistent, repeatable capture of link training, equalization negotiation and other data
-
Supported by Xgig tool suite including Trace Control, Expert™ and Serialytics™
-
Re-configurable for DC, RF, mmW, FA, WLR and more
-
Thermal range: -60˚C to 300˚C available
-
Upgrade path to meet your future needs
-
Stable and repeatable measurements over a wide thermal range
-
Moisture-free, light-tight and EMI-shielded test environment with MicroChamber® technology
-
Advanced EMI-shielding with PureLine with AttoGuard technologies
-
Best solution for low-noise and 1/f measurements
-
Minimize AC and spectral noise
-
Minimizes settling times for efficient measurements, without compromising accuracy over full thermal range
-
Locking roll-out stage
-
Innovative microscope remote control
-
Intuitive ergonomic stage controls
-
Quick, safe, and comfortable wafer access
-
Easy on-wafer navigation
-
Fast setup and test data gathering
-
Dedicated Velox version for manual probe stations
-
AugmentedAlign tool with on screen markers for improved RF measurement accuracy
-
Up to 65 GHz system bandwidth
-
Up to 120 GBaud detectable baud rate
-
Up to 160 GS/s sample rate
-
Real-time acquisition for testing of coherent modulated optical communications links
-
Built-in dispersion compensation, polarization de-multiplexing, and carrier recovery algorithms
-
Supports DP-QPSK, DP-16QAM, and a wide variety of other PSK and QAM formats
-
Support for custom modulation formats
-
Built-in local oscillator
-
Adaptive calibration – Receiver can be disconnected and reconnected without factory calibration
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)