-
Part of the MicroBrite™ family of high performance, compact machine vision lights.
-
Our DF196 Series delivers direct illumination at a low angle to cast shadows used to identify surface defects, embossed text, etc.
-
This dark field ring light is more directional and less diffuse than the DF198.
-
Available in 4 sizes with an intesity of 72kLux (working distance of 25mm with DF196-100)
VTI Instruments - RX Series IEPE/voltage Instruments, Bridge Measurement, Charge Vibration Measurement and Thermocouple Measurement Systems
The RX product family includes 24-channel IEPE/voltage instruments (RX0424), 24-channel high performance bridge measurements (RX0124), 24-channel high performance charge vibration measurements (RX0224), and 32-channel thermocouple measurement systems (RX1032).
VTI Instruments’s family of rugged instrumentation is designed and built to operate in some of the most extreme environmental conditions imaginable, without compromising measurement accuracy or performance
RX0424 | 24-Channel IEPE Accelerometer / Voltage Inputs |
RX0124 | 24-Channel Bridge/Strain gage measurements |
RX0224 | 24-Channel Charge vibration measurements |
RX1032 | 32-Channel Thermocouple Measurement System |
More Product Information
-
Full transceiver functionality
-
Collinear design
-
Low cost plastic lens
-
Hardened case for industrial environment
-
Use to measure layer thickness
-
Use to produce scanned images
-
Single high flex umbilical
-
Variety of focal lengths available
-
Capable of being cleaned
-
All Digital IF technology
-
10.1” WVGA (1024 x 600) Display
-
Frequency range from 9 KHz up to 3.2 GHz
-
-161 dBm/Hz Displayed Average Noise Level (Typ)
-
-98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)
-
Total Amplitude Accuracy < 0.7 dB
-
1 Hz Minimum Resolution Bandwidth (RBW)
-
Comes with standard Preamplifier and Tracking Generator Kits.
-
Optional Reflection/VSWR, Advanced Measurement Kit and EMI Pre-compliance measurement kits.
-
Backward Compatible with L Series
-
Function and bus compatible with the California Instruments L Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Transient Programming
-
Test products for susceptibility to AC line disturbances
-
-
Built-in Measurements
-
Performs voltage, current, and power measurements
-
-
Advanced Features
-
Arbitrary waveform generation, harmonic analysis, GPIB interface are some of the available options
-
-
Interface
-
Standard USB & RS232C interface.
-
Optional GPIB & LAN available
-
-
CE Marked (400V input model ONLY)
-
Safe, reliable, and consistent operation
-
Key Features Lx Series
-
Backward Compatible
-
Compatible with HP6834B & iL Series AC Sources Function & bus compatible with the Agilent HP6834B & California Instruments iL Series
-
-
Three phase and Single phase modes
-
Ideally suited for avionics and defense applications
-
-
3 KVA to 18 KVA Power Levels
-
Match power source and cost to application requirements
-
-
Arbitrary Waveform Generator
-
Test products for harmonics susceptibility
-
-
Built-in Power Analyzer
-
Performs voltage and load current harmonic analysis and waveform acquisition
-
-
Standard IEEE-488, USB & RS232
-
Remote control interface for ATE system integration include
-
-
High power density in a 1U chassis (up to 5 kW) or a 2U chassis (up to 10 kW)
-
Intuitive touch panel control
-
Available in either Fixed or Autoranging output
-
Multi-language display for global operation
-
Auto paralleling for higher power
-
Full remote control via Virtual Panels™
- Support the most high-performance Camera Link cameras with available support for Full and 80-bit mode at up to 85 MHz
- Perform deterministic image acquisition by way of the jitter-free Camera Link 2.1 interface
- Maximize system compatibility with the choice of PCIe® 2.1 x1, x4 or x8 connectivity
- Eliminate missed frames with ample onboard buffering and PCIe bandwidth
- Optimize multi-camera applications via support for up to four Base or two Full/80-bit Camera Link cameras per board
- Minimize space requirements and maximize PC compatibility through a half-length design with mini Camera Link connectivity for true single-slot operation
- Improve and simplify system connectivity with Power-overCamera-Link (PoCL) support at extended cable lengths
7 series Assemblies offer phase stability in multi purpose applications delivering reliable electrical performance, especially in phase & amplitude stability against temperature, to support repeatable measurement results.
VTI Instruments
VTI Instruments, an AMETEK Programmable Power brand, provides products and systems which are used to monitor and record data that characterizes the physical integrity and performance of aircraft, engines, and other large structures, as well as automate the functional testing of complex electronic systems. VTI Instruments is recognized as an industry leader with a reputation of providing reliable data, first time, every time. A sustained focus on innovation and technology enables customers to optimize their capital investment through product longevity, while ensuring unmatched measurement integrity and data reliability.
VTI Instruments has customers in over 30 different countries and in a wide variety of industries including aerospace, defense, power generation, automotive and consumer electronics.
Contact Details
AMETEK Programmable Power, Inc. (VTI Instruments) − San Diego
9250 Brown Deer Road, San Diego, CA 92121, USA
Phone: 858-450-0085
Fax: 858-458-0267
Email: sales.ppd@ametek.com for general inquiries