Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
-
Up to 5 Gpts of acquisition memory enables detailed viewing of long events
-
15.6" 1900 x 1080 Full HD capacitive touchscreen
-
New ProBus2 input supports up to 8 GHz bandwidth and direct compatibility with a wide variety of existing ProBus probes - 50Ω and 1MΩ coupling modes support all input types on a single connector
-
MAUI with OneTouch user interface for intuitive and efficient operation
-
Deep toolbox enables and simplifies complex analysis
-
Intuitive navigation to quickly find important features in long waveforms
-
Revolutionary technology advancement for wafer and die-level photonics probing
-
Highest accuracy in test results
-
New innovative combination of hardware and software features to align and optimize fibers/arrays in a wafer-level trench
-
Minimized coupling losses with minimal trench dimensions
-
Industry standard for vertical coupling to wafer-level grating couplers
-
Positioning hardware is precisely calibrated to the probe station and ready to perform die-to-die optical optimizations in minutes
-
Dark, shielded and frost-free
-
-40°C to +125°C
-
Leveraging considerable expertise through an innovative engineering team
-
Pioneering set of automated functions that perform critical calibrations of the optical positioning system to the probe station
-
Exclusive FormFactor-developed automated test methodology
-
Automates manual tasks by integrating probe station machine vision capability with optical positioning and test equipment
-
FormFactor-developed graphical user interface to manually control the optical positioning system
-
Configurable between single fibers, fiber arrays and edge coupling holders
-
Customizable configuration up to 25 contacts: RF, Eye-Pass power, ground, logic
-
Lithographically-defined tips allow automated over temperature measurement on pads as small as 30 µm x 50 µm
-
Low and repeatable contact resistance on aluminum pads (< 0.05 Ω) ensures accurate results
-
Durable probe structure ensures more than 250,000 contacts
-
Able to measure from -40°C to +125°C without compromising performance or accuracy of specifications
-
Ideal for a wide range of applications such as RF, mm-Wave and sub-THz characterization, FA, DWC, MEMS, optoelectronic tests and WL
-
Re-configurable and upgradable as requirements grow
-
Minimizes setup times with no loss in performance or accuracy
-
Seamless integration of various measurement instruments
-
Solid station frame
-
Built-in vibration-isolation solution for superior vibration attenuation
-
Rigid microscope bridge
-
Compact and rigid mechanical design
-
Highly accurate measurement results
-
Incorporates best-known methods
-
Ergonomic and straightforward design for comfortable and easy operation
-
Low-profile design
-
Simple microscope operation
-
Quick and ergonomic change of DUT through pull-out stage
-
Minimize training efforts
-
Fast time to data
-
Convenient operation
-
Continues the Infinity family’s Industry leading electrical performance
-
High temperature capability (175° C +) for automotive device characterization and other applications
-
Better tip visibility for enhanced placement accuracy and repeatability
-
Improved tip life/durability with solid rhodium contacts
-
New tip architecture enables support for narrower pitches (e.g. 25um)
-
Advanced mechanical design combined with small contacts enables probing on smaller pads/pitches and improves durability and robustness
-
Coaxial and triaxial measurements up to 10,000 V
-
High-quality construction with low-noise electrical performance
-
Replaceable probe tips in a variety of tip sizes
-
Temperature range of -60°C to 300°C
-
Triaxial measurement ensures a much better understanding of device leakage in the off state
-
Highly reliable, stable and repeatable measurements
-
Integrally designed as part of a complete measurement solution
-
1 kV CAT safety rated
-
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
-
1% gain accuracy
-
High offset capability at both high and low attenuation
-
AC or DC coupling
-
ProBus active probe interface with automatic scaling
-
Auto-zero capabilities
-
Wide oscilloscope compatibility
-
High performance power bypassing provides low-impedance and resonant-free connections to 20 GHz
-
RF bandwidth to 500 MHz
-
Long probe life: > 250,000 contacts
-
Beryllium-copper tips for gold pads or tungsten for aluminum pads
-
Oscillation-free testing of wide-bandwidth analog circuits
-
Use with ACP series probes to provide functional at-speed testing for known-good-die
-
Mix multiple contact types: Ground, Power (Standard or Eye-Pass), Logic/Signal
-
Low and repeatable contact resistance on aluminum pads ( < 0.25 Ω on Al, < 0.01 Ω on Au)
-
Available in 250 MHz and 350 MHz models.
-
2, 4 and 8 channel modes.
-
16-bit vertical resolution.
-
Max Sampling rate of 1.2 GS/s.
-
Max sinewave frequency of 250 MHz and 350 MHz respectively.
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)