VIAVI - ADS-B INTEGRITY™ ADS-B Out Integrity Test Application

VIAVI - ADS-B INTEGRITY™ ADS-B Out Integrity Test ApplicationVIAVI - ADS-B INTEGRITY™ ADS-B Out Integrity Test ApplicationVIAVI - ADS-B INTEGRITY™ ADS-B Out Integrity Test ApplicationVIAVI - ADS-B INTEGRITY™ ADS-B Out Integrity Test Application
  • ADS-B equipment installation verification
  • Complete AC 20-165B fast and convenient reporting to identify installation issues
  • STC support
  • Eliminate post STC operational flights
  • Coupled testing in the hangar or on the flight line, eliminates:
    • Open sky requirements
    • GPS repeater
    • Weather issues
    • Interference with ATC operations
  • Saves time and money

More

VIAVI's new software application verifies the performance of ADS-B Out Equipment.

For installed systems, the application will control our IFR6000/6015 Transponder Test Set and GPSG-1000 Positional Simulator to simulate a flight path, allowing for a complete dynamic AC 20-165B performance verification, and identify any compliance failures prior to flying the aircraft. A detailed ADS-B Out compliance report can be generated showing pass/fail criteria.

For development and factory test, the application controls our IFF-45TS/A and GPSG-1000 for a complete dynamic performance verification.

More Product Information

Teledyne LeCroy - SPARQ Series Signal Integrity Network Analyzers
  • Provides complete S-parameter measurements on up to 12 ports
  • Measures from DC to 40 GHz
  • One-button-press internal OSLT calibration
  • Analyzes in both frequency and time domain
  • Produces mixed-mode and single-ended simulation-ready S-parameters
  • Remove effects from fixtures, connectors and launches using either Time Gating or S-parameter de-embedding
  • Inherent TDR/TDT capability and preview modes for quick checks and debugging
  • Characterizes crosstalk of multi lane differential structures
  • Available at a fraction of the cost of other network analyzer solutions

VIAVI - RGS-2000NG TCAS Test Set
  • Software-driven design allows for field updates for adding new features, capability or modifications due to industry changes
  • TCAS and ADS-B Target Generator
  • Simulates 32 dynamic/400 static intruders
  • ADS-B squitter encode/decode
  • More test capability than any tester in the market, all packed into one box
  • Pulse and frequency measurement
  • Transponder test option for Modes A, C, S
  • Optional Command set emulation for SDX-2000, ATC-1400A and S-1403DL
  • 10.4 inch touch screen LCD display for operator control of all test set capabilities or can be remotely controlled via GPIB or Ethernet
  • Four port antenna simulation
  • Hybrid surveillance
  • Six independent transmitters and two receivers
  • Data parsing for analysis

VIAVI - APM-424 MK XII/XIIA Test Sets
  • DoD AIMS 03-1000A Mark XIIA (Mode 5 level 1 and 2) certified *
  • Transponder Test Set Modes 1, 2, 3/A, C, 4, S, and Mode 5 * (Level 1 & 2)
  • Mode S Elementary and Enhanced Surveillance
  • Interrogator Test Set Modes 1, 2, 3/A, C, 4, S, TCAS, ETCAS and Mode 5 * (Level 1 & 2)
  • Self-diagnostic
  • Factory upgrade kits available for APM-424(V)3 and TS-4530 units
* APM-424(V)5 only

VIAVI - IFR 6015 Military Flightline Test Set
  • Mode S level 1-4, (level automatically determined), FAR Part 43 appendix F, (including proposed Eurocontrol extension), Eurocontrol Elementary and Enhanced Surveillance
  • Quickly and easily provides accurate measurement of transponder transmitting frequency, power and receiver sensitivity. Predetermined configurations for testing any class of transponder.
  • ICAO Annex 10 amendment 77
  • ADS-B TX/RX
  • TIS
  • IFF Modes 1 & 2 and TACAN
  • Tests any DME 1 MHz spaced X or Y channel. Measurements include: interrogator transmitter frequency/peak power, Pulse Repetition Frequency (PRF), P1/P2 width and pulse spacing. Provides accurate range and velocity simulation, station ident, squitter control.
  • TACAN Test Modes; T/R Norm, T/R Range Only, T/R Inverse, A/A Beacon, A/A Range Only and A/A Inverse
  • Simulates the airborne environment necessary to allow verification/certification of proper operation of an aircraft’s TCAS I and II as well as E-TCAS installations.
  • Detachable directional antenna
  • Large 5.7-inch LCD display
  • Simple user interface
  • Lightweight at less than 8 lbs.

VIAVI - PSD90-1C AC/DC Fuel Capacitance Test Set
  • Easy to operate/calibrate
  • Annual calibration
  • Lightweight / portable
  • Rechargeable battery or externally powered
  • Percent of battery capacity displayed
  • Self-test on power-up
  • Measures DC voltage
  • Manual or Auto Ranging
  • 2 and 3 Wire Meggar
  • Compliant with Boeing Spec 10-61959 Rev H
  • MIL-STD-810 Method 511.4 certified
  • Traceable to NIST
  • Tests any AC or DC capacitive fuel, water, LOX/engine oil or other AC capacitive system*

VIAVI - PSD60-2R AC Fuel Capacitance Test Set
  • Compatible with AD 98-20-40 & AD 99-03-04 compliant aircraft (Mod 6 and above)
  • Modular design for high reliability and low maintenance
  •  Closed box calibration using front panel controls - performed annually
  • Battery powered with percent of charge displayed
  • Maintenance codes displayed to aid in troubleshooting
  • Distance-to-Fault (DTF) Mode determines the "length" of the wire or the approximate distance to a break in the wire or shield
  • Large selection of aircraft specific interface cables readily available

VIAVI - IFR 4000 Nav/Comm Flightline Test Set
  • Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
  • Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
  • Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
  • Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
  • Generation of ARINC 596 Selective Calling Tones
  • Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
  • Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
  • Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
  • Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
  • Guided Test capability cuts down total test time

VIAVI - IFR 6000 Ramp/Flightline Test Set
  • Individual test modes: Mode S, ATCRBS Transponder, DME, TCAS, TIS, ADS-B MON/ ADS-B GEN (DO-260A/B), 978MHz UAT
  • Large keys for gloved operation
  • Simple user interface
  • Lightweight and compact at 8 lbs.
  • Battery operation 6 hours plus between charges
  • Fully FAR part 43 appendix F compliant
  • Transponder Auto-Test
  • Data dump of transponder test results to PC
  • Elementary and Enhanced Surveillance parameters (DAP’s)
  • Transponder level automatically determined and capability checked to avoid nuisance Auto-Test failures
  • Comprehensive GICB test
  • Configuration files for different classes of transponder
  • Comprehensively tests any DME channel
  • including track sensitivity
  • User selectable TCAS scenarios
  • TCAS fast scenario feature uses Auto Altitude and Converge to ensure automatic collision at zero range
  • Over-the-air or direct-connect operation
  • Parametric measurements including TX power and frequency
  • USB flash drive software update via web site download
  • Optional ADS-B capabilities are DO-260A/B compliant
  • Optional TCAS and 978 MHz UAT capability
  • Optional testing using UC-584 Coupler

VIAVI - 3515AR-EP Portable Radio Communications Test Set
The 3515AR-EP Test set is a complete communication service monitor designed to test EPLRS radios The 3515AR-EP includes spectrum analyzer, oscilloscope and test script language for automating tests, incorporating test instructions, data collection, etc.