Teledyne LeCroy - Probe Adapters
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-Ended Active Probes
-
Differential Active Probes
-
Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.
Probe Adapters
TPA10 - TekProbe to ProBus Probe Adapter |
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case. |
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors |
More Product Information
-
Choice of 8, 10, or 13 GHz bandwidth models
-
3.5 Vpk-pk dynamic range
-
±4 V offset range
-
Ideal for DDR3, DDR4, LPDDR3
-
Deluxe soft carrying case
-
Wide variety of tips and leads
-
Solder-In Lead
-
Positioner (Browser) Tip
-
SMA/SMP Lead
-
Square Pin Lead
-
-
SMA/SMP lead set accessory does not require purchase of a different amplifier
-
Low loading and high imedance for minimal signal disturbance
-
Power bypass inductance: 8 nH
-
Standard DCQ probes have flat tip needles available in nickel-plated tungsten or BeCu with diameters of 0.75 mil, 1.0 mil and 1.5 mil.
-
Supports collinear and non-standard needle configurations
-
Up to 16 DC for standard; maximum of 24 DC for custom
-
Ideal for probing the entire circuit for functional test
-
DC probes can provide power or slow logic to circuit under test
-
Revolutionary technology advancement for wafer and die-level photonics probing
-
Highest accuracy in test results
-
New innovative combination of hardware and software features to align and optimize fibers/arrays in a wafer-level trench
-
Minimized coupling losses with minimal trench dimensions
-
Industry standard for vertical coupling to wafer-level grating couplers
-
Positioning hardware is precisely calibrated to the probe station and ready to perform die-to-die optical optimizations in minutes
-
Dark, shielded and frost-free
-
-40°C to +125°C
-
Leveraging considerable expertise through an innovative engineering team
-
Pioneering set of automated functions that perform critical calibrations of the optical positioning system to the probe station
-
Exclusive FormFactor-developed automated test methodology
-
Automates manual tasks by integrating probe station machine vision capability with optical positioning and test equipment
-
FormFactor-developed graphical user interface to manually control the optical positioning system
-
Configurable between single fibers, fiber arrays and edge coupling holders
-
Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
-
Automatic probe detection
-
Provides all necessary power and offset control to the attached probe
-
Supports probes up to 4 GHz
-
Easy firmware updates
-
Wide variety of probes supported including:
-
Preamplifiers
-
Current Probes
-
Single-ended Active Probes
-
Differential Active Probes
-
-
DC-40 GHz bandwidth
-
10 ps rise time
-
Low insertion and return loss
-
2 mils of tip-to-tip compliance
-
High probing angle and clearance
-
Sample can be loaded or removed when the cryostat is cold
-
High cooling power with sample in (He-3) liquid (400 mK with 400 microwatt cooling power)
-
Sample probe and a load-lock with gate valve
-
DigRF v4 Decodes
-
Low-speed (26 Mb/s)
-
Medium-speed (1248 Mb/s)
-
High-speed (1456 Mb/s)
-
-
DigRF v3 Decodes
-
Low-speed (6.5 Mb/s)
-
Medium-speed (26 Mb/s)
-
High-speed (312 Mb/s)
-
-
Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms
-
Correlate analog waveforms with protocol decode on one screen
-
View decoded data in hexadecimal format
-
Decode information expands as the time base is adjusted or zoomed
-
Convenient table display with quick “Zoom to byte” capability
-
Quick search capability for specific message packets
-
High performance power bypassing provides low-impedance and resonant-free connections to 20 GHz
-
RF bandwidth to 500 MHz
-
Long probe life: > 250,000 contacts
-
Beryllium-copper tips for gold pads or tungsten for aluminum pads
-
Oscillation-free testing of wide-bandwidth analog circuits
-
Use with ACP series probes to provide functional at-speed testing for known-good-die
-
Mix multiple contact types: Ground, Power (Standard or Eye-Pass), Logic/Signal
-
Low and repeatable contact resistance on aluminum pads ( < 0.25 Ω on Al, < 0.01 Ω on Au)
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Oscilloscopes are tools used by designers and engineers to measure and analyze complex electronic signals in order to develop high-performance systems and to validate electronic designs in order to improve time to market. Protocol analyzers are tools used by designers and engineers to generate and monitor traffic over high speed serial data interfaces, including DDR, PCI Express, Fibre Channel, Serial ATA, SAS, USB and others. Both products are critical in the development of a wide variety of demanding design applications.
We utilize both of these important product areas in combination to tackle the most demanding serial data test applications, offering tailored solutions to help our customers perfect their chips, interfaces, subsystems and products which utilize these important communications standards. With the explosion in the use of serial data communications technologies in semiconductors, between devices on circuit boards and between computers and peripherals, we are aimed at a growing and important market.
Our oscilloscopes offer a powerful combination of large and informative displays combined with advanced waveshape analysis capabilities typically tailored to enhance the productivity of engineers in specific applications areas such as serial data test, disk drive test and automotive bus analysis.
Headquartered in Chestnut Ridge, New York, LeCroy has sales, service and development subsidiaries in the US and throughout Europe and Asia. LeCroy products are employed across a wide variety of industries, including semiconductor, computer, consumer electronics, military/aerospace, automotive/industrial, and telecommunications.
Contact Details
Headquarters Teledyne LeCroy
700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, USA
Phone: 800-553-2769 or 845-425-2000
Phone Support: 1-800-553-2769
Fax Sales: 845-578-5985
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com (Oscilloscopes, Waveform Generators, Signal Integrity)