Up to 65 GHz  Up to 80 Channels @ 36 GHz  Up to 160 GS/s  Up to 512 Mpts/Ch  50 fs rms Sample Clock (Intrinsic) Jitter  Jitter Between All Channels of <130 fs rms

Static power analysis - like a dedicated power analyzer  Dynamic power analysis – capture more information  Complete test coverage – control system, power section, motor  Comprehensive mechanical interface  Harmonics calculation option  Vector display option (THREEPHASEVECTOR)  Waveform Transformations option (THREEPHASEdq0)  16 Channels with OscilloSYNC™

DigRF v4 Decodes  Low-speed (26 Mb/s)  Medium-speed (1248 Mb/s)  High-speed (1456 Mb/s)  DigRF v3 Decodes  Low-speed (6.5 Mb/s)  Medium-speed (26 Mb/s)  High-speed (312 Mb/s)  Convert DigRF 3G and v4 I and Q digital data to corresponding analog waveforms  Correlate analog waveforms with protocol decode on one screen  View decoded data in hexadecimal format  Decode information expands as the time base is adjusted or zoomed  Convenient table display with quick “Zoom to byte” capability  Quick search capability for specific message packets

Compact probe head Supports fine pitch SMD probing Rugged, Sharp tip HF optimized connection accessories Over 30 accessories

Probe adapters provide simple and easy interface of third-party probes as well as change between the different Teledyne LeCroy Oscilloscope input and cable types (ProBus, ProLink, K/2.92 mm, BNC and SMA). Depending on the adapters, changing between the Teledyne LeCroy Oscilloscope's input type may have an effect on the overall performance of the channel.

Available in 30MHz, 40MHz, 60MHz, 80MHz, 120MHz, 200MHz, 350MHz and 500MHz models All models feature 2 channels Max Sampling rate of 150 Msa/s (30MHz & 60 MHz) 1.2 Gsa/s (40MHz, 80MHz, 120MHz) and 2.4 Gsa/s (200MHz, 350MHz and 500MHz) models. Up to 16-bit vertical resolution (14-bit on 30MHz & 60MHz models). All models have 4.3" Touchscreens. Excellent analog and digital modulation types available (AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM)

150 MHz, 2 analog channels  8 synchronized digital channels (T3AWG2152-D only)  16-bit vertical resolution  128 MPts @Ch waveform memory  Max sampling rate of 600 MS/s

Available in 250 MHz and 350 MHz models 2, 4 and 8 channel modes 16-bit vertical resolution Max Sampling rate of 1.2 GS/s Max sinewave frequency of 250 MHz and 350 MHz respectively

2, 4 and 8 channel configurations  16-bit vertical resolution  Sample Rate up to 12,32 GS/s with RF mode  16-bit vertical resolution.  4 GSample waveform memory per channel  Up to 5 Vpp Output Voltage and ±2.5 V Baseline Offset (into 50?)

Four operating modes: – CC, CV, CR, CP Static, Dynamic and Sequence mode support Built in Application Functions - Short Circuit Test, Battery Test Mode, CR-LED Mode, OCP and OPP Test  Provides a load of up to 300 Watts Programmable and analog external control

All Digital IF technology  10.1” WVGA (1024 x 600) Display  Frequency range from 9 KHz up to 3.2 GHz  -161 dBm/Hz Displayed Average Noise Level (Typ)  -98 dBc/Hz @ 10 khz Offset Phase Noise (Typ)  Total Amplitude Accuracy < 0.7 dB  1 Hz Minimum Resolution Bandwidth (RBW)  Comes with Preamplifier

True Differential TDR with <3mm Spatial Resolution  Small Form Factor and Battery Powered  S Parameters up to 15 GHz  35 ps Rise Time  Up to 50,000 points long memory  Emerging Serial Data Standards Testing